1. The sand scraper is added to match the drum feeder of the ball mill, so that the sand pulp flows to the drum feeder of the mill from the side.2. It adopts rolling bearing, ZQ or ZL speed reducer, reducing the frictional resistance and installation and maintenance time.3. Improved lubrication parts, dry oil pump for large-specification products.Remarks:1. Please mark out the model, quantity and spiral direction of the classifier while ordering.2. The lengthened type (lengthening of sand return zone, lengthening of settling zone) can be designed and made according to customer demands, and the lengthening amount should be noted.The main technical parameters Type | Model | Standard | Spiral diameter£¨mm£© | Spiral speed£¨r/min£© | Trough | Inclination angle(°’) | Production capacity£¨t/d£© | Drive motor | Hoist motor | Weight£¨kg£© | Length (mm) | Width(mm) | Overflow discharge | Overflow discharge | Model | Power£¨kW£© | Model | Power£¨kW£© | High weir single screw | FLG-5 | Φ500 | 500 | 8.5¡«15.5 | 4500 | 555 | 14°¡«18’30’ | 32 | 143¡«261 | Y90J-6 | 1.1 | Manual control | ¡¡ | 1600 | FLG-7 | Φ750 | 750 | 4.5¡«9.9 | 5500 | 830 | 14°¡«18’30’ | 65 | 256¡«564 | Y132S-6 | 3 | Manual control | ¡¡ | 2900 | FLG-10 | Φ1000 | 1000 | 3.5¡«7.6 | 6500 | 1112 | 14°¡«18’30’ | 85 | 473¡«1026 | Y132M2-6 | 5.5 | Manual control | ¡¡ | 4400 | FLG-12 | Φ1200 | 1200 | 6 | 6500 | 1372 | 14°¡«18’30’ | 155 | 1170¡«1600 | Y132M2-6 | 5.5 | Y90L-4 | 1.5 | 8800 | FLG-15 | Φ1500 | 1500 | 2.5¡«6 | 8265 | 1664 | 14°¡«18’30’ | 235 | 1140¡«2740 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11680 | FLG-20 | Φ2000 | 2000 | 3.6¡«5.5 | 8400 | 2200 | 14°¡«18’30’ | 400 | 3890¡«5940 | Y160L-6/4 | 11/15 | Y100L2-4 | 3 | 20450 | FLG-24 | Φ2400 | 2400 | 3.64 | 9130 | 2600 | 14°¡«18’30’ | 580 | 6800 | Y160L-4 | 15 | Y100L2-4 | 3 | 25650 | FLG-30 | Φ3000 | 3000 | 3.2 | 12500 | 3200 | 14°¡«18’30’ | 890 | 11650 | Y200L2-6 | 22 | Y113M-4 | 4 | 37000 | High weir double screw | 2FLG-12 | Φ1200 | 1200 | 6 | 6500 | 2600 | 14°¡«18’30’ | 310 | 2340¡«3200 | Y132M2-6 | 5.5×2 | Y90L-4 | 1.5×2 | 15840 | 2FLG-15 | Φ1500 | 1500 | 2.5¡«6 | 8250 | 3200 | 14°¡«18’30’ | 470 | 2280¡«5480 | Y160M-6 | 7.5×2 | Y100L-4 | 2.2×2 | 22100 | 2FLG-20 | Φ2000 | 2000 | 3.6¡«3.5 | 8400 | 1280 | 14°¡«18’30’ | 800 | 7780¡«11880 | Y160L-6/4 | 11×2
15×2 | Y100L2-4 | 3×2 | 36400 | 2FLG-24 | Φ2400 | 2400 | 3.67 | 9130 | 5100 | 14°¡«18’30’ | 1160 | 13600 | Y240L-4 | 30 | Y100L2-4 | 3×2 | 45874 | 2FLG-30 | Φ3000 | 3000 | 3.2 | 12500 | 6300 | 14°¡«18’30’ | 1758 | 23300 | Y225M-4 | 45 | Y112M-4 | 4×2 | 73030 | Immerged single screw | FLG-10 | Φ1000 | 1000 | 6¡«7.4 | 8400 | 1112 | 14°¡«18’30’ | 75 | 473¡«1026 | Y132M2-6 | 5.5 | Manual control | ¡¡¡¡¡¡ | 6000 | FLG-12 | Φ1200 | 1200 | 5¡«7 | 8400 | 1372 | 14°¡«18’30’ | 120 | 1170¡«1630 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11020 | FLG-15 | Φ1500 | 1500 | 2.5¡«6 | 10500 | 1664 | 14°¡«18’30’ | 185 | 1140¡«2740 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 15340 | FLG-20 | Φ2000 | 2000 | 3.6¡«5.5 | 12900 | 2200 | 14°¡«18’30’ | 320 | 3890¡«5940 | Y160L-6/4 | 11/15 | Y1002-4 | 3 | 29060 | FLG-24 | Φ2400 | 2400 | 3.64 | 11130 | 2600 | 14°¡«18’30’ | 455 | 6800 | Y180M-4 | 18.5 | Y112M-4 | 4 | 37267 | FLG-30 | Φ3000 | 3000 | 3.2 | 14300 | 3200 | 14°¡«18’30’ | 705 | 11650 | Y200L-4 | 30 | Y112M-4 | 4 | 43500 | Merged double screw | 2FLG-12 | Φ1200 | 1200 | 6 | 8400 | 2600 | 14°¡«18’30’ | 240 | 1770¡«2800 | Y160M-6 | 7.5×2 | Y90L-4 | 1.5×2 | 19610 | 2FLG-15 | Φ1500 | 1500 | 2.5¡«6 | 10500 | 3200 | 14°¡«18’30’ | 370 | 2280¡«5480 | Y160M-6 | 7.5×2 | Y100L2-4 | 2.2×2 | 27450 | 2FLG-20 | Φ2000 | 2000 | 3.6¡«5.5 | 12900 | 4280 | 14°¡«18’30’ | 640 | 7780¡«11880 | Y160L-6/4 | 11×2
15×2 | Y100L2-4 | 3×2 | 50000 | 2FLG-24 | Φ2400 | 2400 | 3.67 | 11130 | 5100 | 14°¡«18’30’ | 910 | 13700 | Y225S-4 | 37 | Y112M-4 | 4×2 | 65283 | 2FLG-30 | Φ3000 | 3000 | 3.2 | 14300 | 6300 | 14°¡«18’30’ | 1410 | 23300 | Y225M-4 | 45 | Y112M-4 | 4×2 | 84870 |
|
